Tracer-2215rn с мт-5 инструкция

tracer-2215rn с мт-5 инструкция
Information is displayed on a backlit LCD display. Fortunately the majority of our equipment can run on the more common voltages of 12, 24 & 48 Volts. The value you will receive is your rough guide as to the amount of Watts from the panels that you will require. This information is often available from the manufacturer’s website or on the data sheet of the specific product. Information is displayed on a backlit LCD display. Description: This module is to connect with solar charge controller Tracer MPPT series.

Battery capacity strip flash: Each strip equals to 20% of battery capacity. After any button is pressed the display will be in high brightness and backlight. To save power, the backlight automatically turns off after 30 seconds. Max speed: up to 10.6m/s. Max Accel: up to 309m/s2. Peak Force: up to 67.6N. Thrust rod: up to 510mm.

You have to bid at least Sorry, you can’t lower your maximum bid once it’s placed. Divide your total amount of watt hours by 5.5 hours. Serving the following markets: Material Handling, Factory Automation, Semiconductor, Packaging. Within Miro’s existing product range that could vary from 5 to 55 Volts. Operation shows as following picture. 3. Data setting instruction Battery capacity modify: capacity modify range from 10AH to 900AH, the default value is 200AH. The modify data should be near or equal to the real capacity. The all-in-one motor plus drive design eliminates the need for external drives and numerous cables, improving dependability and overall performance, while dramatically reducing commissioning time and total system cost.

Похожие записи: